And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.670
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.616
And
I accept adding "cowsay" to Additional Software
3.563
And
Additional Software is correctly configured for package "cowsay"
0.586
And
I shutdown Tails and wait for the computer to power off
8.012
And
I start Tails from USB drive "__internal" with network unplugged
35.881
And
I enable persistence
5.694
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.408
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.013
And
available upgrades have been checked
3.269
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.457
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
17.100
And
I start Tails from USB drive "__internal" with network unplugged
36.268
And
I enable persistence
6.280
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.612
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052