And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.631
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.676
And
I accept adding "cowsay" to Additional Software
3.737
And
Additional Software is correctly configured for package "cowsay"
0.872
And
I shutdown Tails and wait for the computer to power off
5.662
And
I start Tails from USB drive "__internal" with network unplugged
37.719
And
I enable persistence
6.564
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.491
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.341
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.014
And
available upgrades have been checked
1.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.562
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.575
And
I start Tails from USB drive "__internal" with network unplugged
37.375
And
I enable persistence
6.435
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.634
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064