And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.315
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.137
And
I accept adding "cowsay" to Additional Software
4.926
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
2.573
And
I start Tails from USB drive "__internal" with network unplugged
34.793
And
I enable persistence
11.848
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.057
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.239
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.107
And
I prepare the Additional Software upgrade process to fail
0.115
And
the network is plugged
0.099
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.496
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
13.053
And
I start Tails from USB drive "__internal" with network unplugged
33.615
And
I enable persistence
11.225
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.316
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090