And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.119
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
4.893
And
I accept adding "cowsay" to Additional Software
5.169
And
Additional Software is correctly configured for package "cowsay"
0.537
And
I shutdown Tails and wait for the computer to power off
3.913
And
I start Tails from USB drive "__internal" with network unplugged
33.469
And
I enable persistence
11.034
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.951
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.029
And
the network is plugged
0.042
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.325
And
I can open the Additional Software configuration window from the notification
2.548
And
I shutdown Tails and wait for the computer to power off
3.909
And
I start Tails from USB drive "__internal" with network unplugged
31.734
And
I enable persistence
11.202
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.962
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055