And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.162
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.780
And
I accept adding "cowsay" to Additional Software
4.884
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
3.949
And
I start Tails from USB drive "__internal" with network unplugged
37.025
And
I enable persistence
10.754
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.684
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.022
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.496
And
I can open the Additional Software configuration window from the notification
2.868
And
I shutdown Tails and wait for the computer to power off
17.281
And
I start Tails from USB drive "__internal" with network unplugged
37.296
And
I enable persistence
10.389
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.508
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079