And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.573
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.607
And
I accept adding "cowsay" to Additional Software
4.965
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
8.054
And
I start Tails from USB drive "__internal" with network unplugged
37.223
And
I enable persistence
10.806
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.360
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.015
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.017
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
23.340
And
I start Tails from USB drive "__internal" with network unplugged
38.661
And
I enable persistence
10.330
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075