And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.395
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.881
And
I accept adding "cowsay" to Additional Software
4.962
And
Additional Software is correctly configured for package "cowsay"
0.777
And
I shutdown Tails and wait for the computer to power off
8.139
And
I start Tails from USB drive "__internal" with network unplugged
37.564
And
I enable persistence
9.265
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
11.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.020
And
available upgrades have been checked
1.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.575
And
I can open the Additional Software configuration window from the notification
2.597
And
I shutdown Tails and wait for the computer to power off
12.491
And
I start Tails from USB drive "__internal" with network unplugged
38.389
And
I enable persistence
10.393
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
13.514
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.584
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086