And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.234
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.846
And
I accept adding "cowsay" to Additional Software
4.818
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
8.179
And
I start Tails from USB drive "__internal" with network unplugged
37.305
And
I enable persistence
10.448
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.090
And
I log in to a new session
10.883
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
2.200
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.462
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
17.312
And
I start Tails from USB drive "__internal" with network unplugged
36.744
And
I enable persistence
10.753
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
9.815
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.052
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082