And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.309
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.378
And
I accept adding "cowsay" to Additional Software
4.864
And
Additional Software is correctly configured for package "cowsay"
0.672
And
I shutdown Tails and wait for the computer to power off
7.247
And
I start Tails from USB drive "__internal" with network unplugged
40.027
And
I enable persistence
10.819
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
12.770
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.238
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.016
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.019
And
I can open the Additional Software configuration window from the notification
2.619
And
I shutdown Tails and wait for the computer to power off
17.776
And
I start Tails from USB drive "__internal" with network unplugged
39.517
And
I enable persistence
10.962
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.465
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.553
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069