And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.448
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.465
And
I accept adding "cowsay" to Additional Software
3.631
And
Additional Software is correctly configured for package "cowsay"
0.632
And
I shutdown Tails and wait for the computer to power off
8.170
And
I start Tails from USB drive "__internal" with network unplugged
36.314
And
I enable persistence
10.090
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
9.679
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.020
And
available upgrades have been checked
2.205
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.497
And
I can open the Additional Software configuration window from the notification
2.572
And
I shutdown Tails and wait for the computer to power off
18.476
And
I start Tails from USB drive "__internal" with network unplugged
35.555
And
I enable persistence
9.455
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.779
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.468
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063