Project Number Date
test_Tails_ISO_test-suite-options 7 23 Jun 2025, 22:01

Failures Overview

The following summary displays scenarios that failed.

Feature: Root access control enforcement
Tags: @product
2:39.392
Scenario I can perform administrative tasks if I have set up an administration password in the Welcome Screen
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given I have started Tails from DVD without network and logged in with an administration password 2:39.392
cannot 
cannot find TailsGreeterAdminPasswordDialog.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/common_steps.rb:548:in `/^I set an administration password$/'
./features/step_definitions/snapshots.rb:153:in `block in reach_checkpoint'
./features/step_definitions/snapshots.rb:150:in `each'
./features/step_definitions/snapshots.rb:150:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ from\ DVD\ without\ network\ and\ logged\ in\ with\ an\ administration\ password$/'
features/root_access_control.feature:7:in `Given I have started Tails from DVD without network and logged in with an administration password'
And running a command as root with pkexec requires PolicyKit administrator privileges 0.000
Then I can run a command as root with sudo 0.000
Then I can run a command as root with pkexec 0.000
After features/support/hooks.rb:330 5.650 
SCENARIO FAILED: 'I can perform administrative tasks if I have set up an administration password in the Welcome Screen' (at time 00:14:45)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:14:45_I_can_perform_administrative_tasks_if_I_have_set_up_an_administration_password_in_the_Welcome_Screen.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:14:45_I_can_perform_administrative_tasks_if_I_have_set_up_an_administration_password_in_the_Welcome_Screen.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:14:45_I_can_perform_administrative_tasks_if_I_have_set_up_an_administration_password_in_the_Welcome_Screen.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:14:45_I_can_perform_administrative_tasks_if_I_have_set_up_an_administration_password_in_the_Welcome_Screen.journal
After features/support/hooks.rb:100 0.005
Feature: Time syncing
Tags: @product @check_tor_leaks
52.327
Scenario Clock with host's time while using bridges
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Before features/support/hooks.rb:507 0.005
Steps
Given I have started Tails from DVD without network and logged in 30.024
When the network is plugged 2.763
And the Tor Connection Assistant autostarts 7.829
And I configure some normal bridges in the Tor Connection Assistant 11.709
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/tor.rb:828:in `click_connect_to_tor'
./features/step_definitions/tor.rb:502:in `tca_configure'
./features/step_definitions/tor.rb:628:in `/^I configure (?:some|the) (persistent )?(\w+) bridges (from a QR code )?in the Tor Connection Assistant(?: in (easy|hide) mode)?( without connecting|)$/'
features/time_syncing.feature:17:in `And I configure some normal bridges in the Tor Connection Assistant'
And I wait until Tor is ready 0.000
Then the system clock is less than 5 minutes incorrect 0.000
After features/support/hooks.rb:515 0.031
After features/support/hooks.rb:330 7.416 
SCENARIO FAILED: 'Clock with host's time while using bridges' (at time 00:20:40)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:20:40_Clock_with_host_s_time_while_using_bridges.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:20:40_Clock_with_host_s_time_while_using_bridges.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:20:40_Clock_with_host_s_time_while_using_bridges.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/00:20:40_Clock_with_host_s_time_while_using_bridges.journal
After features/support/hooks.rb:100 0.000
Feature: System memory erasure on shutdown
Tags: @product @slow @not_release_blocker
13:2.868
Scenario Erasure of read and write disk caches of persistent data on shutdown
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.007
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13:2.868
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:139:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:137:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/erase_memory.feature:75:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
When I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
When I trigger shutdown 0.000
Then I find very few patterns in the guest's memory after 20 seconds 0.000
After features/support/hooks.rb:330 7.034 
SCENARIO FAILED: 'Erasure of read and write disk caches of persistent data on shutdown' (at time 01:17:00)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:17:00_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:17:00_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:17:00_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:17:00_Erasure_of_read_and_write_disk_caches_of_persistent_data_on_shutdown.journal
After features/support/hooks.rb:100 0.006
Feature: Installing Tails to a USB drive
Tags: @product
1:17.954
Scenario Installing Tails with Tails Installer to a pristine USB drive
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.004
Steps
Given I have started Tails from DVD without network and logged in 47.476
And I temporarily create a 7200 MiB disk named "install" 0.408
And I plug USB drive "install" 10.457
And I install Tails to USB drive "install" by cloning 19.612
cannot 
cannot find TailsClonerWindow.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/usb.rb:156:in `/^I start Tails Installer$/'
./features/step_definitions/usb.rb:187:in `/^I (install|reinstall|upgrade) Tails( with Persistent Storage)? (?:to|on) USB drive "([^"]+)" by cloning$/'
features/usb_install.feature:39:in `And I install Tails to USB drive "install" by cloning'
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
But there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 5.528 
SCENARIO FAILED: 'Installing Tails with Tails Installer to a pristine USB drive' (at time 01:25:04)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:25:04_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:25:04_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:25:04_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:25:04_Installing_Tails_with_Tails_Installer_to_a_pristine_USB_drive.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product
1:17.640
Scenario Re-installing Tails over an existing USB installation with a persistent partition
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.005
Steps
# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.
# This first part is done without Tails Installer (install from Tails USB image)
# Note: the "__internal" disk will keep its state across scenarios
# and features until one of its snapshots is restored.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:17.640
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/usb_install.feature:70:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I have started Tails from DVD without network and logged in 0.000
And I clone USB drive "__internal" to a temporary USB drive "install" 0.000
And I plug USB drive "install" 0.000
# This second part is done with Tails Installer, that's what this scenario is about
When I reinstall Tails to USB drive "install" by cloning 0.000
Then the running Tails is installed on USB drive "install" 0.000
And there is a random seed on USB drive "install" 0.000
And there is no persistence partition on USB drive "install" 0.000
After features/support/hooks.rb:330 7.349 
SCENARIO FAILED: 'Re-installing Tails over an existing USB installation with a persistent partition' (at time 01:56:24)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:56:24_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:56:24_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:56:24_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/01:56:24_Re-installing_Tails_over_an_existing_USB_installation_with_a_persistent_partition.journal
After features/support/hooks.rb:100 0.000
Feature: Installing Tails to a USB drive
Tags: @product @uefi
6:5.120
Scenario Booting Tails from a USB drive in UEFI mode
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Steps
Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 23.106
And I power off the computer 0.846
And the computer is set to boot in UEFI mode 1.216
When I start Tails from USB drive "__internal" with network unplugged and I login 5:39.951
Remote 
Remote shell seems to be down (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/support/helpers/vm_helper.rb:548:in `wait_until_remote_shell_is_up'
./features/step_definitions/common_steps.rb:450:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:85:in `When I start Tails from USB drive "__internal" with network unplugged and I login'
Then Tails is running from USB drive "__internal" 0.000
And the boot device has safe access rights 0.000
And Tails has started in UEFI mode 0.000
After features/support/hooks.rb:330 12.695 
SCENARIO FAILED: 'Booting Tails from a USB drive in UEFI mode' (at time 02:02:38)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:02:38_Booting_Tails_from_a_USB_drive_in_UEFI_mode.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:02:38_Booting_Tails_from_a_USB_drive_in_UEFI_mode.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:02:38_Booting_Tails_from_a_USB_drive_in_UEFI_mode.journal
After features/support/hooks.rb:100 0.037
Feature: Installing Tails to a USB drive
Tags: @product
3:2.039
Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.008
Steps
Given a computer 0.193
And I start Tails from USB drive "usbimage" with network unplugged and I login 3:1.845
try_for() 
try_for() timeout expired
Last ignored exception was: FindFailed: can not find any of the patterns ["TailsBootMenuSyslinux.png", "TailsBootMenuSyslinux_alt.png"] on the screen
./features/support/helpers/screen.rb:248:in `rescue in wait_any'
./features/support/helpers/screen.rb:232:in `wait_any'
./features/step_definitions/common_steps.rb:407:in `block in enter_boot_menu_cmdline'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:442:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:404:in `enter_boot_menu_cmdline'
./features/step_definitions/common_steps.rb:442:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/usb_install.feature:100:in `And I start Tails from USB drive "usbimage" with network unplugged and I login'
Then Tails is running from USB drive "usbimage" 0.000
And the label of the system partition on "usbimage" is "Tails" 0.000
And the system partition on "usbimage" is an EFI system partition 0.000
And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.000
And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.000
And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.000
And the system partition on "usbimage" has the expected flags 0.000
After features/support/hooks.rb:330 18.162 
SCENARIO FAILED: 'The system partition is updated when booting from a USB drive where a Tails USB image was copied' (at time 02:09:38)
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:09:38_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:09:38_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:09:38_The_system_partition_is_updated_when_booting_from_a_USB_drive_where_a_Tails_USB_image_was_copied.journal
After features/support/hooks.rb:100 0.144
Feature: Additional software
Tags: @product @check_tor_leaks @slow
33.962
Scenario I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.016
Before features/support/hooks.rb:507 0.016
Steps
Given I start Tails from a freshly installed USB drive with an administration password and the network is plugged and I login 33.962
cannot 
cannot find TailsGreeterAdminPasswordDialog.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/common_steps.rb:548:in `/^I set an administration password$/'
./features/step_definitions/common_steps.rb:311:in `/^I start Tails from a freshly installed USB drive with an administration password and the network is plugged and I login$/'
features/additional_software_packages.feature:28:in `Given I start Tails from a freshly installed USB drive with an administration password and the network is plugged and I login'
And I update APT using apt 0.000
And I install "popularity-contest" using apt 0.000
Then I am proposed to add the "popularity-contest" package to my Additional Software 0.000
When I create a persistent storage and activate the Additional Software feature 0.000
Then Additional Software is correctly configured for package "popularity-contest" 0.000
When I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
And I log in to a new session 0.000
And the Additional Software installation service has started 0.000
Then I am notified that the installation succeeded 0.000
And Additional Software is correctly configured for package "popularity-contest" 0.000
And the package "popularity-contest" is installed after Additional Software has been started 0.000
After features/support/hooks.rb:515 0.038
After features/support/hooks.rb:330 6.184 
SCENARIO FAILED: 'I set up Additional Software when installing a package without persistent partition and the package is installed next time I start Tails' (at time 02:10:24)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:10:24_I_set_up_Additional_Software_when_installing_a_package_without_persistent_partition_and_the_package_is_installed_next_time_I_start_Tails.journal
After features/support/hooks.rb:100 0.000
Feature: Additional software
Tags: @product @check_tor_leaks @slow
6:6.171
Scenario The Additional Software dpkg hook notices when persistence is locked down while installing a package
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.005
Before features/support/hooks.rb:507 0.003
Steps
Given a computer 0.212
And I start Tails from USB drive "__internal" and I login with an administration password 3:52.940
And I update APT using apt 25.108
When I install "makepp" using apt 37.600
Then the Additional Software dpkg hook has been run for package "makepp" and notices the persistence is locked 1:10.310
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/additional_software_packages.rb:157:in `/^the Additional Software dpkg hook has been run for package "([^"]*)" and notices the persistence is locked$/'
features/additional_software_packages.feature:49:in `Then the Additional Software dpkg hook has been run for package "makepp" and notices the persistence is locked'
And the package "makepp" is installed 0.000
After features/support/hooks.rb:515 0.050
After features/support/hooks.rb:330 9.607 
SCENARIO FAILED: 'The Additional Software dpkg hook notices when persistence is locked down while installing a package' (at time 02:16:38)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.file_content_var_log_boot.log
Content of /run/live-additional-software/log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.file_content_run_live-additional-software_log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:16:38_The_Additional_Software_dpkg_hook_notices_when_persistence_is_locked_down_while_installing_a_package.journal
After features/support/hooks.rb:100 0.014
Feature: Additional software
Tags: @product @check_tor_leaks @slow
2:6.660
Scenario My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Before features/support/hooks.rb:507 0.003
Steps
Given a computer 0.188
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 2:6.471
The 
The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with roleName='password text'
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:671:in `/^I try to enable persistence( with the changed passphrase)?$/'
./features/step_definitions/usb.rb:703:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:291:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:55:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
When I uninstall "popularity-contest" using apt 0.000
And I accept removing "popularity-contest" from Additional Software 0.000
Then "popularity-contest" is not in the list of Additional Software 0.000
When I start Synaptic 0.000
And I update APT using Synaptic 0.000
And I install "cowsay" using Synaptic 0.000
And I accept adding "cowsay" to Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I uninstall "cowsay" using apt 0.000
And I refuse removing "cowsay" from Additional Software 0.000
Then Additional Software is correctly configured for package "cowsay" 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I remove "cowsay" from the list of Additional Software using Additional Software GUI 0.000
Then "cowsay" is not in the list of Additional Software 0.000
When I install "cowsay" using apt 0.000
And I refuse adding "cowsay" to Additional Software 0.000
Then "cowsay" is not in the list of Additional Software 0.000
After features/support/hooks.rb:515 0.034
After features/support/hooks.rb:330 11.789 
SCENARIO FAILED: 'My Additional Software list is configurable through a GUI or through notifications when I install or remove packages with APT or Synaptic' (at time 02:18:57)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:18:57_My_Additional_Software_list_is_configurable_through_a_GUI_or_through_notifications_when_I_install_or_remove_packages_with_APT_or_Synaptic.journal
After features/support/hooks.rb:100 0.022
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker
2:9.068
Scenario Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.011
Before features/support/hooks.rb:507 0.009
Steps
Given a computer 0.220
And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password 2:8.847
The 
The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with roleName='password text'
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:671:in `/^I try to enable persistence( with the changed passphrase)?$/'
./features/step_definitions/usb.rb:703:in `/^I enable persistence( with the changed passphrase)?$/'
./features/step_definitions/common_steps.rb:291:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/additional_software_packages.feature:79:in `And I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password'
And I configure APT to prefer an old version of cowsay 0.000
When I install an old version "3.03+dfsg2-1" of the cowsay package using apt 0.000
And I accept adding "cowsay" to Additional Software 0.000
And Additional Software is correctly configured for package "cowsay" 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
# Prevent the "Warning: virtual machine detected!" notification from racing
# with the one we'll be interacting with below.
And I disable the tails-virt-notify-user.service user unit 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
# We remove the newest package after it has been downloaded and before
# it is installed, so that the upgrade process fails
And I prepare the Additional Software upgrade process to fail 0.000
And the network is plugged 0.000
And Tor is ready 0.000
And available upgrades have been checked 0.000
And I see the "The upgrade of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software configuration window from the notification 0.000
And I shutdown Tails and wait for the computer to power off 0.000
And I start Tails from USB drive "__internal" with network unplugged 0.000
And I enable persistence 0.000
# We need to add back this custom APT source for the Additional Software
# install step, as it was not saved in persistence
And I configure APT to prefer an old version of cowsay 0.000
And I log in to a new session 0.000
And the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started 0.000
And I revert the APT tweaks that made it prefer an old version of cowsay 0.000
And the network is plugged 0.000
And Tor is ready 0.000
Then the Additional Software upgrade service has started 0.000
And the installed version of package "cowsay" is newer than "3.03+dfsg2-1" 0.000
After features/support/hooks.rb:515 0.102
After features/support/hooks.rb:330 7.038 
SCENARIO FAILED: 'Recovering in offline mode after Additional Software previously failed to upgrade and then succeed to upgrade when online' (at time 02:21:20)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:21:20_Recovering_in_offline_mode_after_Additional_Software_previously_failed_to_upgrade_and_then_succeed_to_upgrade_when_online.journal
After features/support/hooks.rb:100 0.006
Feature: Additional software
Tags: @product @check_tor_leaks @slow @not_release_blocker_inherited
1:57.550
Scenario I am notified when Additional Software fails to install a package
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Before features/support/hooks.rb:507 0.003
Steps
Given a computer 0.187
And I start Tails from USB drive "__internal" with network unplugged 1:39.948
And I enable persistence 17.414
The 
The Dogtail init script raised: SearchError: descendent of [application | Welcome to Tails!]: child with roleName='password text'
STDOUT:

STDERR:

 (Dogtail::Failure)
./features/support/helpers/dogtail.rb:93:in `run'
./features/support/helpers/dogtail.rb:339:in `initialize'
./features/support/helpers/dogtail.rb:268:in `new'
./features/support/helpers/dogtail.rb:268:in `call_tree_api_method'
./features/support/helpers/dogtail.rb:276:in `child'
./features/step_definitions/usb.rb:671:in `/^I try to enable persistence( with the changed passphrase)?$/'
./features/step_definitions/usb.rb:703:in `/^I enable persistence( with the changed passphrase)?$/'
features/additional_software_packages.feature:123:in `And I enable persistence'
And I remove the "cowsay" deb files from the APT cache 0.000
# Prevent the "Warning: virtual machine detected!" notification from racing
# with the one we'll be interacting with below.
And I disable the tails-virt-notify-user.service user unit 0.000
And I log in to a new session 0.000
Then I see the "The installation of your additional software failed" notification after at most 300 seconds 0.000
And I can open the Additional Software log file from the notification 0.000
And the package "cowsay" is not installed 0.000
After features/support/hooks.rb:515 0.053
After features/support/hooks.rb:330 5.739 
SCENARIO FAILED: 'I am notified when Additional Software fails to install a package' (at time 02:23:23)
Exception thrown while trying to save /tmp/TailsToaster/artifact.file_content_run_live-additional-software_log: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/run/live-additional-software/log'
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.file_content_var_log_boot.log
Output of ls -la --full-time /live/persistence/tailsdata_unlocked: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_persistent_volume
Output of ls -lar --full-time /var/cache/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_cache_apt
Output of ls -lar --full-time /var/lib/apt: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_var_lib_apt
Output of mount: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.cmd_output_mount
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/02:23:23_I_am_notified_when_Additional_Software_fails_to_install_a_package.journal
After features/support/hooks.rb:100 0.016
Feature: Emergency shutdown
Tags: @product @not_release_blocker
1:29.519
Scenario Tails erases memory and shuts down on USB boot medium removal: persistent data
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:29.519
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/emergency_shutdown.feature:48:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I prepare Tails for memory erasure tests 0.000
And I fill a 128 MiB file with a known pattern on the persistent filesystem 0.000
And patterns cover at least 100 MiB in the guest's memory 0.000
When I eject the boot medium 0.000
And I wait for Tails to finish wiping the memory 0.000
Then I find very few patterns in the guest's memory 0.000
And Tails eventually shuts down 0.000
After features/support/hooks.rb:330 7.377 
SCENARIO FAILED: 'Tails erases memory and shuts down on USB boot medium removal: persistent data' (at time 03:12:01)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:12:01_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:12:01_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:12:01_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:12:01_Tails_erases_memory_and_shuts_down_on_USB_boot_medium_removal:_persistent_data.journal
After features/support/hooks.rb:100 0.000
Feature: Backing up the persistent storage
Tags: @product
1:15.938
Scenario Using Tails' custom backup tool to backup a newly added file
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.013
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:15.938
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/backup.feature:8:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# The volume cannot be in use when GuestFs clones it, which we do below
And I shutdown Tails and wait for the computer to power off 0.000
And I clone USB drive "__internal" to a temporary USB drive "backup" 0.000
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 0.000
And I write a file "/live/persistence/TailsData_unlocked/new" with contents "foo" 0.000
When I start Tails' custom backup tool 0.000
Then the backup tool displays "Plug in your backup Tails USB stick" 0.000
When I plug USB drive "backup" 0.000
And I give the Persistent Storage on drive "backup" its own UUID 0.000
And I click "Retry" in the backup tool 0.000
Then the backup tool displays "Do you want to back up your Persistent Storage now?" 0.000
When I click "Back Up" in the backup tool 0.000
And I enter my persistent storage passphrase into the polkit prompt 0.000
Then the backup tool displays "Your Persistent Storage was backed up successfully to your backup Tails USB stick!" 0.000
# The backup tool ejects the drive, so we have to replug it
When I unplug USB drive "backup" 0.000
And I plug USB drive "backup" 0.000
Then the USB drive "backup" contains the same files as my persistent storage 0.000
After features/support/hooks.rb:330 7.240 
SCENARIO FAILED: 'Using Tails' custom backup tool to backup a newly added file' (at time 03:15:21)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:15:21_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:15:21_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:15:21_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:15:21_Using_Tails__custom_backup_tool_to_backup_a_newly_added_file.journal
After features/support/hooks.rb:100 0.000
Feature: Tails documentation
Tags: @product @doc @not_release_blocker
39.215
Scenario The Tails documentation launcher works when offline
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.006
Steps
Given I have started Tails from DVD without network and logged in 28.969
When I start "Tails Documentation" via GNOME Activities Overview 10.246
cannot 
cannot find GnomeApplicationsMenu.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/common_steps.rb:1141:in `/^I start "([^"]+)" via GNOME Activities Overview$/'
features/documentation.feature:6:in `When I start "Tails Documentation" via GNOME Activities Overview'
Then the Tor Browser has started 0.000
Then "Tails - Documentation" has loaded in the Tor Browser 0.000
After features/support/hooks.rb:330 5.623 
SCENARIO FAILED: 'The Tails documentation launcher works when offline' (at time 03:19:05)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:19:05_The_Tails_documentation_launcher_works_when_offline.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:19:05_The_Tails_documentation_launcher_works_when_offline.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:19:05_The_Tails_documentation_launcher_works_when_offline.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:19:05_The_Tails_documentation_launcher_works_when_offline.journal
After features/support/hooks.rb:100 0.000
Feature: Using Evince
Tags: @product @not_release_blocker
1:15.510
Scenario I cannot view a PDF file stored in persistent /home/amnesia/.gnupg
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Steps
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:15.510
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/evince.feature:54:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
And I copy "/usr/share/cups/data/default-testpage.pdf" to "/home/amnesia/.gnupg" as user "amnesia" 0.000
Then the file "/home/amnesia/.gnupg/default-testpage.pdf" exists 0.000
Given I start monitoring the AppArmor log of "/usr/bin/evince" 0.000
And I try to open "/home/amnesia/.gnupg/default-testpage.pdf" with Evince 0.000
Then Evince tells me it cannot open "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
And AppArmor has denied "/usr/bin/evince" from opening "/home/amnesia/.gnupg/default-testpage.pdf" 0.000
After features/support/hooks.rb:330 7.162 
SCENARIO FAILED: 'I cannot view a PDF file stored in persistent /home/amnesia/.gnupg' (at time 03:27:03)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:27:03_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:27:03_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:27:03_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:27:03_I_cannot_view_a_PDF_file_stored_in_persistent__home_amnesia_.gnupg.journal
After features/support/hooks.rb:100 0.000
Feature: GNOME is well-integrated into Tails
Tags: @product
1:16.895
Scenario I can launch various apps via GNOME Activities Overview
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.011
Steps
# Some apps (Electrum and Persistent Storage Backup) only start when
# a Persistent Storage is available.
Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 1:16.895
Failed 
Failed to restore snapshot (RuntimeError)
./features/step_definitions/common_steps.rb:89:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/common_steps.rb:95:in `rescue in post_snapshot_restore_hook'
./features/step_definitions/common_steps.rb:72:in `post_snapshot_restore_hook'
./features/step_definitions/snapshots.rb:167:in `reach_checkpoint'
./features/step_definitions/snapshots.rb:173:in `/^I\ have\ started\ Tails\ without\ network\ from\ a\ USB\ drive\ with\ a\ persistent\ partition\ enabled\ and\ logged\ in$/'
features/gnome.feature:22:in `Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in'
# Some apps (Tor Browser) only start when the network is plugged.
And the network is plugged 0.000
And Tor is ready 0.000
And all notifications have disappeared 0.000
When I start "Additional Software" via GNOME Activities Overview 0.000
And I close the "tails-additional-software-config" window 0.000
When I start "Disks" via GNOME Activities Overview 0.000
# The close button of GNOME Disks is not accessible
And I close the "gnome-disks" window via Alt+F4 0.000
When I start "GNOME Terminal" via GNOME Activities Overview 0.000
And I close the "gnome-terminal-server" window 0.000
When I start "Files" via GNOME Activities Overview 0.000
And I close the "org.gnome.Nautilus" window 0.000
When I start "Persistent Storage" via GNOME Activities Overview 0.000
And I close the "tps-frontend" window 0.000
When I start "Persistent Storage Backup" via GNOME Activities Overview 0.000
And I close the "zenity" window 0.000
When I start "Pidgin" via GNOME Activities Overview 0.000
And I close the "Pidgin" window via Alt+F4 0.000
When I start "Thunderbird" via GNOME Activities Overview 0.000
And I close the "Thunderbird" window 0.000
When I start "Tor Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
When I start "Unlock VeraCrypt Volumes" via GNOME Activities Overview 0.000
And I close the "unlock-veracrypt-volumes" window 0.000
When I start "Unsafe Browser" via GNOME Activities Overview 0.000
And I close the "Firefox" window 0.000
After features/support/hooks.rb:330 7.052 
SCENARIO FAILED: 'I can launch various apps via GNOME Activities Overview' (at time 03:29:41)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:29:41_I_can_launch_various_apps_via_GNOME_Activities_Overview.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:29:41_I_can_launch_various_apps_via_GNOME_Activities_Overview.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:29:41_I_can_launch_various_apps_via_GNOME_Activities_Overview.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:29:41_I_can_launch_various_apps_via_GNOME_Activities_Overview.journal
After features/support/hooks.rb:100 0.000
Feature: Hardware failures
Tags: @product
4:25.032
Scenario Outline Disk partitioning errors without a persistent partition
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.191
Steps
Given a computer 3.532
And I set Tails to boot with options "test_partitioning_errors=guid" 0.000
And I temporarily create a 7200 MiB disk named "temp" 0.382
And I plug USB drive "temp" 1.208
And I write the Tails USB image to disk "temp" 1:3.012
When I start Tails from USB drive "temp" with network unplugged 3:16.895
try_for() 
try_for() timeout expired
Last ignored exception was: RemoteShell::ServerFailure: FileNotFoundError: [Errno 2] No such file or directory: '/tmp/gdm-env'
./features/support/helpers/remote_shell.rb:71:in `block (2 levels) in communicate'
./features/support/helpers/remote_shell.rb:42:in `loop'
./features/support/helpers/remote_shell.rb:42:in `block in communicate'
./features/support/helpers/remote_shell.rb:37:in `communicate'
./features/support/helpers/remote_shell.rb:174:in `execute'
./features/support/helpers/remote_shell.rb:185:in `initialize'
./features/support/helpers/dogtail.rb:80:in `new'
./features/support/helpers/dogtail.rb:80:in `run'
./features/support/helpers/dogtail.rb:70:in `initialize'
./features/step_definitions/usb.rb:108:in `new'
./features/step_definitions/usb.rb:108:in `greeter'
./features/step_definitions/common_steps.rb:460:in `block (2 levels) in <top (required)>'
./features/support/helpers/misc_helpers.rb:78:in `block (2 levels) in try_for'
./features/support/helpers/misc_helpers.rb:66:in `loop'
./features/support/helpers/misc_helpers.rb:66:in `block in try_for'
./features/support/helpers/misc_helpers.rb:65:in `try_for'
./features/step_definitions/common_steps.rb:459:in `block in <top (required)>'
./features/step_definitions/common_steps.rb:284:in `block in <top (required)>' (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/common_steps.rb:459:in `/^the computer (?:re)?boots Tails$/'
./features/step_definitions/common_steps.rb:284:in `/^I start Tails from (.+?) drive "(.+?)"( with network unplugged)?( and I login( with persistence enabled)?( with the changed persistence passphrase)?( (?:and|with) an administration password)?)?$/'
features/hardware_failure.feature:80:in `When I start Tails from USB drive "temp" with network unplugged'
features/hardware_failure.feature:72:in `When I start Tails from USB drive "temp" with network unplugged'
Then Tails is running from USB drive "temp" 0.000
And the Greeter recommends reinstalling Tails due to partitioning errors 0.000
And the Greeter forbids starting Tails 0.000
And the Greeter forbids all settings but language 0.000
And Tails detected partitioning error guid-not-randomized 0.000
After features/support/hooks.rb:330 6.579 
SCENARIO FAILED: 'Disk partitioning errors without a persistent partition, Examples (#1)' (at time 03:55:23)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:55:23_Disk_partitioning_errors_without_a_persistent_partition,_Examples___1_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:55:23_Disk_partitioning_errors_without_a_persistent_partition,_Examples___1_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:55:23_Disk_partitioning_errors_without_a_persistent_partition,_Examples___1_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/03:55:23_Disk_partitioning_errors_without_a_persistent_partition,_Examples___1_.journal
After features/support/hooks.rb:100 0.281
Feature: Localization
Tags: @product @doc @slow @not_release_blocker
4:3.059
Scenario Outline Tails is localized for every tier-1 language
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.002
Steps
Given I have started Tails from DVD without network and stopped at Tails Greeter's login screen 27.752
When I log in to a new session in Arabic (ar) 58.230
Then the keyboard layout is set to "us" 0.582
When the network is plugged 2.330
And Tor is ready 30.460
Then I successfully start the Unsafe Browser 37.576
And I kill the Unsafe Browser 6.859
When I enable the screen keyboard 0.305
Then the screen keyboard works in Tor Browser 1:18.961
cannot 
cannot find BrowserAddressBarCommaRTL.png on the screen (FindFailed)
./features/support/helpers/screen.rb:181:in `rescue in wait'
./features/support/helpers/screen.rb:165:in `wait'
./features/step_definitions/browser.rb:419:in `/^the screen keyboard works in Tor Browser$/'
features/localization.feature:44:in `Then the screen keyboard works in Tor Browser'
features/localization.feature:30:in `Then the screen keyboard works in Tor Browser'
And DuckDuckGo is the default search engine 0.000
And I kill the Tor Browser 0.000
And the screen keyboard works in Thunderbird 0.000
And the layout of the screen keyboard is set to "us" 0.000
After features/support/hooks.rb:330 11.821 
SCENARIO FAILED: 'Tails is localized for every tier-1 language, Examples (#1)' (at time 04:18:53)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:18:53_Tails_is_localized_for_every_tier-1_language,_Examples___1_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:18:53_Tails_is_localized_for_every_tier-1_language,_Examples___1_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:18:53_Tails_is_localized_for_every_tier-1_language,_Examples___1_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:18:53_Tails_is_localized_for_every_tier-1_language,_Examples___1_.journal
After features/support/hooks.rb:100 0.000
Feature: Localization
Tags: @product @doc @slow @not_release_blocker
1:7.733
Scenario Outline Tails is localized for every tier-1 language
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:273 0.003
Steps
Given I have started Tails from DVD without network and stopped at Tails Greeter's login screen 12.061
When I log in to a new session in Turkish (tr) 43.697
Then the keyboard layout is set to "tr" 0.137
When the network is plugged 0.078
And Tor is ready 11.758
try_for() 
try_for() timeout expired (Timeout::Error)
./features/support/helpers/misc_helpers.rb:145:in `rescue in try_for'
./features/support/helpers/misc_helpers.rb:51:in `try_for'
./features/step_definitions/tor.rb:828:in `click_connect_to_tor'
./features/step_definitions/tor.rb:502:in `tca_configure'
./features/step_definitions/tor.rb:512:in `/^I configure a direct connection in the Tor Connection Assistant$/'
./features/step_definitions/common_steps.rb:653:in `/^I successfully configure Tor$/'
./features/step_definitions/common_steps.rb:607:in `/^Tor is ready$/'
features/localization.feature:57:in `And Tor is ready'
features/localization.feature:26:in `And Tor is ready'
Then I successfully start the Unsafe Browser 0.000
And I kill the Unsafe Browser 0.000
When I enable the screen keyboard 0.000
Then the screen keyboard works in Tor Browser 0.000
And DuckDuckGo is the default search engine 0.000
And I kill the Tor Browser 0.000
And the screen keyboard works in Thunderbird 0.000
And the layout of the screen keyboard is set to "us" 0.000
After features/support/hooks.rb:330 7.894 
SCENARIO FAILED: 'Tails is localized for every tier-1 language, Examples (#11)' (at time 04:57:16)
Boot log: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:57:16_Tails_is_localized_for_every_tier-1_language,_Examples___11_.file_content_var_log_boot.log
Screenshot: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:57:16_Tails_is_localized_for_every_tier-1_language,_Examples___11_.png
Video: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:57:16_Tails_is_localized_for_every_tier-1_language,_Examples___11_.mkv
Systemd journal: https://jenkins.tails.boum.org/job/test_Tails_ISO_test-suite-options/7/artifact/build-artifacts/04:57:16_Tails_is_localized_for_every_tier-1_language,_Examples___11_.journal
After features/support/hooks.rb:100 0.000
Feature: Packages are up-to-date
Tags: @source
3.533
Scenario All packages are up-to-date
Before features/support/hooks.rb:266 0.000
Before features/support/hooks.rb:532 0.001
Steps
Given I have the build manifest for the image under test 0.000
Then all packages listed in the build manifest are up-to-date 3.533
Command 
Command failed (pid 50762 exit 1): ["/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/bin/needed-package-updates", "--config=/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/config/ci/needed-package-updates.yml", "--file=/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/tmp/tails-amd64-test-suite-options@22f5fe4a45+stable@d88a397cbb-20250623T1412Z.build-manifest", {:err=>[:child, :out]}]:
INFO: Check local file /var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/tmp/tails-amd64-test-suite-options@22f5fe4a45+stable@d88a397cbb-20250623T1412Z.build-manifest
INFO: Need to upgrade to a new APT snapshot:
  - ublock-origin (1.62.0+dfsg-1) to Debian trixie (1.62.0+dfsg-2)
 (CommandFailed)
/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/features/support/helpers/misc_helpers.rb:321:in `block in cmd_helper'
/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/features/support/helpers/misc_helpers.rb:314:in `popen'
/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/features/support/helpers/misc_helpers.rb:314:in `cmd_helper'
/var/lib/jenkins/workspace/test_Tails_ISO_test-suite-options/features/step_definitions/needed_package_updates.rb:8:in `/^all packages listed in the build manifest are up-to-date$/'
features/needed_package_updates.feature:12:in `Then all packages listed in the build manifest are up-to-date'
After features/support/hooks.rb:539 0.000
After features/support/hooks.rb:100 0.000