And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.594
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.153
And
I accept adding "cowsay" to Additional Software
5.040
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
3.955
And
I start Tails from USB drive "__internal" with network unplugged
33.710
And
I enable persistence
11.669
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.173
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.034
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.851
And
I can open the Additional Software configuration window from the notification
2.700
And
I shutdown Tails and wait for the computer to power off
18.490
And
I start Tails from USB drive "__internal" with network unplugged
34.476
And
I enable persistence
14.392
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059