And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.577
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.270
And
I accept adding "cowsay" to Additional Software
5.440
And
Additional Software is correctly configured for package "cowsay"
0.488
And
I shutdown Tails and wait for the computer to power off
2.536
And
I start Tails from USB drive "__internal" with network unplugged
33.339
And
I enable persistence
11.280
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.210
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.024
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.943
And
I can open the Additional Software configuration window from the notification
2.434
And
I shutdown Tails and wait for the computer to power off
12.811
And
I start Tails from USB drive "__internal" with network unplugged
32.462
And
I enable persistence
11.666
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
6.989
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.069
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059