And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.252
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.380
And
I accept adding "cowsay" to Additional Software
5.193
And
Additional Software is correctly configured for package "cowsay"
0.527
And
I shutdown Tails and wait for the computer to power off
4.148
And
I start Tails from USB drive "__internal" with network unplugged
33.315
And
I enable persistence
11.516
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
7.459
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.033
And
the network is plugged
0.034
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.293
And
I can open the Additional Software configuration window from the notification
2.375
And
I shutdown Tails and wait for the computer to power off
12.724
And
I start Tails from USB drive "__internal" with network unplugged
33.009
And
I enable persistence
11.937
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.566
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044