And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.589
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.394
And
I accept adding "cowsay" to Additional Software
4.942
And
Additional Software is correctly configured for package "cowsay"
0.600
And
I shutdown Tails and wait for the computer to power off
4.156
And
I start Tails from USB drive "__internal" with network unplugged
34.286
And
I enable persistence
11.776
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.340
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.036
And
available upgrades have been checked
0.031
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.774
And
I can open the Additional Software configuration window from the notification
2.466
And
I shutdown Tails and wait for the computer to power off
12.714
And
I start Tails from USB drive "__internal" with network unplugged
32.964
And
I enable persistence
12.117
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.129
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.045
Then
the Additional Software upgrade service has started
0.034
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053