And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.008
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.585
And
I accept adding "cowsay" to Additional Software
5.098
And
Additional Software is correctly configured for package "cowsay"
0.770
And
I shutdown Tails and wait for the computer to power off
4.052
And
I start Tails from USB drive "__internal" with network unplugged
34.195
And
I enable persistence
11.095
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
9.038
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.021
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.318
And
I can open the Additional Software configuration window from the notification
2.509
And
I shutdown Tails and wait for the computer to power off
17.946
And
I start Tails from USB drive "__internal" with network unplugged
33.215
And
I enable persistence
11.479
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.552
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.161
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053