And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.316
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.666
And
I accept adding "cowsay" to Additional Software
4.863
And
Additional Software is correctly configured for package "cowsay"
0.530
And
I shutdown Tails and wait for the computer to power off
3.969
And
I start Tails from USB drive "__internal" with network unplugged
33.690
And
I enable persistence
10.691
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.035
And
I log in to a new session
7.554
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.408
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.028
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.032
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.809
And
I can open the Additional Software configuration window from the notification
2.547
And
I shutdown Tails and wait for the computer to power off
18.051
And
I start Tails from USB drive "__internal" with network unplugged
34.057
And
I enable persistence
10.628
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.641
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.018
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059