And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.613
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.395
And
I accept adding "cowsay" to Additional Software
7.229
And
Additional Software is correctly configured for package "cowsay"
0.875
And
I shutdown Tails and wait for the computer to power off
6.436
And
I start Tails from USB drive "__internal" with network unplugged
58.060
And
I enable persistence
11.427
And
I configure APT to prefer an old version of cowsay
0.030
And
I disable the tails-virt-notify-user.service user unit
0.079
And
I log in to a new session
37.981
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.089
And
available upgrades have been checked
2.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.125
And
I can open the Additional Software configuration window from the notification
2.684
And
I shutdown Tails and wait for the computer to power off
18.130
And
I start Tails from USB drive "__internal" with network unplugged
1:0.622
And
I enable persistence
12.324
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
44.761
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.127
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084