And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.309
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.299
And
I accept adding "cowsay" to Additional Software
6.735
And
Additional Software is correctly configured for package "cowsay"
0.889
And
I shutdown Tails and wait for the computer to power off
6.223
And
I start Tails from USB drive "__internal" with network unplugged
58.826
And
I enable persistence
12.504
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
38.894
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.444
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.069
And
available upgrades have been checked
0.224
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
7.890
And
I can open the Additional Software configuration window from the notification
2.964
And
I shutdown Tails and wait for the computer to power off
14.655
And
I start Tails from USB drive "__internal" with network unplugged
58.705
And
I enable persistence
11.892
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
39.310
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.576
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.074
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.086