And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.383
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.150
And
I accept adding "cowsay" to Additional Software
4.777
And
Additional Software is correctly configured for package "cowsay"
0.712
And
I shutdown Tails and wait for the computer to power off
8.209
And
I start Tails from USB drive "__internal" with network unplugged
39.564
And
I enable persistence
6.863
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.055
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.014
And
available upgrades have been checked
1.129
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.974
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
22.923
And
I start Tails from USB drive "__internal" with network unplugged
39.723
And
I enable persistence
7.146
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.905
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.051
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074