And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.308
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.463
And
I accept adding "cowsay" to Additional Software
3.647
And
Additional Software is correctly configured for package "cowsay"
0.592
And
I shutdown Tails and wait for the computer to power off
4.010
And
I start Tails from USB drive "__internal" with network unplugged
35.894
And
I enable persistence
6.382
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
8.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.013
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.489
And
I can open the Additional Software configuration window from the notification
2.583
And
I shutdown Tails and wait for the computer to power off
13.335
And
I start Tails from USB drive "__internal" with network unplugged
36.659
And
I enable persistence
5.426
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
11.324
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056