And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.283
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.211
And
I accept adding "cowsay" to Additional Software
4.146
And
Additional Software is correctly configured for package "cowsay"
0.520
And
I shutdown Tails and wait for the computer to power off
3.899
And
I start Tails from USB drive "__internal" with network unplugged
31.601
And
I enable persistence
10.840
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
7.510
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.035
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.271
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
17.547
And
I start Tails from USB drive "__internal" with network unplugged
31.719
And
I enable persistence
10.710
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.895
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050