And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.175
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.695
And
I accept adding "cowsay" to Additional Software
4.052
And
Additional Software is correctly configured for package "cowsay"
0.423
And
I shutdown Tails and wait for the computer to power off
2.520
And
I start Tails from USB drive "__internal" with network unplugged
31.888
And
I enable persistence
10.362
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
7.387
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.036
And
available upgrades have been checked
0.038
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.327
And
I can open the Additional Software configuration window from the notification
2.691
And
I shutdown Tails and wait for the computer to power off
12.443
And
I start Tails from USB drive "__internal" with network unplugged
32.224
And
I enable persistence
10.545
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.289
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044