And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.374
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.407
And
I accept adding "cowsay" to Additional Software
5.090
And
Additional Software is correctly configured for package "cowsay"
0.566
And
I shutdown Tails and wait for the computer to power off
2.649
And
I start Tails from USB drive "__internal" with network unplugged
34.931
And
I enable persistence
14.428
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
8.853
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.029
And
available upgrades have been checked
1.113
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.555
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
18.063
And
I start Tails from USB drive "__internal" with network unplugged
35.437
And
I enable persistence
11.531
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.473
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067