And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.316
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.684
And
I accept adding "cowsay" to Additional Software
2.396
And
Additional Software is correctly configured for package "cowsay"
0.642
And
I shutdown Tails and wait for the computer to power off
4.068
And
I start Tails from USB drive "__internal" with network unplugged
36.424
And
I enable persistence
13.154
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
8.014
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.027
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.627
And
I can open the Additional Software configuration window from the notification
2.606
And
I shutdown Tails and wait for the computer to power off
2.857
And
I start Tails from USB drive "__internal" with network unplugged
34.683
And
I enable persistence
14.717
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.198
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.084
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070