And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.533
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.045
And
I accept adding "cowsay" to Additional Software
2.382
And
Additional Software is correctly configured for package "cowsay"
0.578
And
I shutdown Tails and wait for the computer to power off
2.704
And
I start Tails from USB drive "__internal" with network unplugged
34.515
And
I enable persistence
14.654
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
8.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.039
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.948
And
I can open the Additional Software configuration window from the notification
2.454
And
I shutdown Tails and wait for the computer to power off
13.074
And
I start Tails from USB drive "__internal" with network unplugged
34.916
And
I enable persistence
12.594
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
8.267
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.446
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057