And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.767
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.929
And
I accept adding "cowsay" to Additional Software
5.213
And
Additional Software is correctly configured for package "cowsay"
0.461
And
I shutdown Tails and wait for the computer to power off
3.967
And
I start Tails from USB drive "__internal" with network unplugged
36.060
And
I enable persistence
11.118
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.028
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.910
And
I can open the Additional Software configuration window from the notification
2.658
And
I shutdown Tails and wait for the computer to power off
12.673
And
I start Tails from USB drive "__internal" with network unplugged
32.925
And
I enable persistence
10.730
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.248
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078