And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.370
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.013
And
I accept adding "cowsay" to Additional Software
4.081
And
Additional Software is correctly configured for package "cowsay"
0.494
And
I shutdown Tails and wait for the computer to power off
2.567
And
I start Tails from USB drive "__internal" with network unplugged
32.587
And
I enable persistence
11.903
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
6.969
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.037
And
the network is plugged
0.031
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.291
And
I can open the Additional Software configuration window from the notification
2.584
And
I shutdown Tails and wait for the computer to power off
12.760
And
I start Tails from USB drive "__internal" with network unplugged
32.178
And
I enable persistence
12.624
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.077
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.141
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055