And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.072
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.245
And
I accept adding "cowsay" to Additional Software
4.084
And
Additional Software is correctly configured for package "cowsay"
0.743
And
I shutdown Tails and wait for the computer to power off
3.859
And
I start Tails from USB drive "__internal" with network unplugged
34.611
And
I enable persistence
12.784
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
7.384
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.047
And
available upgrades have been checked
0.035
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.834
And
I can open the Additional Software configuration window from the notification
2.933
And
I shutdown Tails and wait for the computer to power off
18.114
And
I start Tails from USB drive "__internal" with network unplugged
33.930
And
I enable persistence
10.609
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.828
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.168
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
the network is plugged
0.043
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059