And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.969
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.341
And
I accept adding "cowsay" to Additional Software
5.245
And
Additional Software is correctly configured for package "cowsay"
0.529
And
I shutdown Tails and wait for the computer to power off
4.040
And
I start Tails from USB drive "__internal" with network unplugged
31.547
And
I enable persistence
10.295
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.037
And
I log in to a new session
7.443
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.139
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.022
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.296
And
I can open the Additional Software configuration window from the notification
2.614
And
I shutdown Tails and wait for the computer to power off
12.407
And
I start Tails from USB drive "__internal" with network unplugged
31.687
And
I enable persistence
10.170
And
I configure APT to prefer an old version of cowsay
0.003
And
I log in to a new session
7.351
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.034
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057