And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.739
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.356
And
I accept adding "cowsay" to Additional Software
5.094
And
Additional Software is correctly configured for package "cowsay"
0.726
And
I shutdown Tails and wait for the computer to power off
3.879
And
I start Tails from USB drive "__internal" with network unplugged
34.679
And
I enable persistence
12.344
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
7.468
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.034
And
available upgrades have been checked
1.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.843
And
I can open the Additional Software configuration window from the notification
2.390
And
I shutdown Tails and wait for the computer to power off
17.802
And
I start Tails from USB drive "__internal" with network unplugged
32.996
And
I enable persistence
12.437
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.971
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.185
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057