And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.893
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.590
And
I accept adding "cowsay" to Additional Software
4.041
And
Additional Software is correctly configured for package "cowsay"
0.542
And
I shutdown Tails and wait for the computer to power off
3.891
And
I start Tails from USB drive "__internal" with network unplugged
34.209
And
I enable persistence
11.203
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.082
And
I log in to a new session
8.353
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.131
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.041
And
available upgrades have been checked
0.036
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.314
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
12.928
And
I start Tails from USB drive "__internal" with network unplugged
33.307
And
I enable persistence
12.034
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
9.238
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058