And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.837
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.780
And
I accept adding "cowsay" to Additional Software
4.897
And
Additional Software is correctly configured for package "cowsay"
0.552
And
I shutdown Tails and wait for the computer to power off
4.024
And
I start Tails from USB drive "__internal" with network unplugged
33.192
And
I enable persistence
11.338
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.024
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.381
And
I can open the Additional Software configuration window from the notification
2.398
And
I shutdown Tails and wait for the computer to power off
17.777
And
I start Tails from USB drive "__internal" with network unplugged
32.996
And
I enable persistence
11.259
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
8.918
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048