And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.427
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.252
And
I accept adding "cowsay" to Additional Software
5.284
And
Additional Software is correctly configured for package "cowsay"
0.670
And
I shutdown Tails and wait for the computer to power off
2.680
And
I start Tails from USB drive "__internal" with network unplugged
34.575
And
I enable persistence
12.836
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
7.851
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.028
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.858
And
I can open the Additional Software configuration window from the notification
2.605
And
I shutdown Tails and wait for the computer to power off
13.319
And
I start Tails from USB drive "__internal" with network unplugged
36.145
And
I enable persistence
11.531
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.467
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045