And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.618
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.063
And
I accept adding "cowsay" to Additional Software
3.933
And
Additional Software is correctly configured for package "cowsay"
0.441
And
I shutdown Tails and wait for the computer to power off
2.554
And
I start Tails from USB drive "__internal" with network unplugged
33.362
And
I enable persistence
12.639
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
7.576
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.042
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.614
And
I can open the Additional Software configuration window from the notification
2.618
And
I shutdown Tails and wait for the computer to power off
17.877
And
I start Tails from USB drive "__internal" with network unplugged
32.782
And
I enable persistence
13.858
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.404
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049