And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.082
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.956
And
I accept adding "cowsay" to Additional Software
4.926
And
Additional Software is correctly configured for package "cowsay"
0.539
And
I shutdown Tails and wait for the computer to power off
4.013
And
I start Tails from USB drive "__internal" with network unplugged
32.908
And
I enable persistence
11.754
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
8.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.049
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.289
And
I can open the Additional Software configuration window from the notification
2.365
And
I shutdown Tails and wait for the computer to power off
12.580
And
I start Tails from USB drive "__internal" with network unplugged
33.440
And
I enable persistence
12.106
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.193
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057