And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.633
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.650
And
I accept adding "cowsay" to Additional Software
6.226
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
3.871
And
I start Tails from USB drive "__internal" with network unplugged
35.465
And
I enable persistence
12.922
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
7.026
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.039
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.953
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
4.465
And
I start Tails from USB drive "__internal" with network unplugged
34.481
And
I enable persistence
11.676
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058