And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.960
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.999
And
I accept adding "cowsay" to Additional Software
4.986
And
Additional Software is correctly configured for package "cowsay"
0.666
And
I shutdown Tails and wait for the computer to power off
4.129
And
I start Tails from USB drive "__internal" with network unplugged
34.007
And
I enable persistence
10.943
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
8.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.044
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.079
And
I can open the Additional Software configuration window from the notification
2.456
And
I shutdown Tails and wait for the computer to power off
14.095
And
I start Tails from USB drive "__internal" with network unplugged
33.894
And
I enable persistence
12.362
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
7.632
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069