And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.965
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.615
And
I accept adding "cowsay" to Additional Software
4.815
And
Additional Software is correctly configured for package "cowsay"
0.516
And
I shutdown Tails and wait for the computer to power off
4.024
And
I start Tails from USB drive "__internal" with network unplugged
32.885
And
I enable persistence
11.362
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.102
And
I log in to a new session
7.517
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.197
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.047
And
available upgrades have been checked
0.029
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.986
And
I can open the Additional Software configuration window from the notification
2.409
And
I shutdown Tails and wait for the computer to power off
17.959
And
I start Tails from USB drive "__internal" with network unplugged
32.750
And
I enable persistence
12.947
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.782
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059