And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.929
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
7.027
And
I accept adding "cowsay" to Additional Software
4.811
And
Additional Software is correctly configured for package "cowsay"
0.512
And
I shutdown Tails and wait for the computer to power off
4.506
And
I start Tails from USB drive "__internal" with network unplugged
34.730
And
I enable persistence
11.405
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
6.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.220
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.040
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.479
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
2.766
And
I start Tails from USB drive "__internal" with network unplugged
34.125
And
I enable persistence
11.671
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.777
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051