And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.003
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.455
And
I accept adding "cowsay" to Additional Software
3.991
And
Additional Software is correctly configured for package "cowsay"
0.457
And
I shutdown Tails and wait for the computer to power off
5.065
And
I start Tails from USB drive "__internal" with network unplugged
31.809
And
I enable persistence
10.258
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.033
And
I log in to a new session
7.884
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.140
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.039
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.835
And
I can open the Additional Software configuration window from the notification
2.581
And
I shutdown Tails and wait for the computer to power off
13.993
And
I start Tails from USB drive "__internal" with network unplugged
31.517
And
I enable persistence
10.336
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.808
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048