And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.172
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.733
And
I accept adding "cowsay" to Additional Software
4.156
And
Additional Software is correctly configured for package "cowsay"
0.499
And
I shutdown Tails and wait for the computer to power off
2.553
And
I start Tails from USB drive "__internal" with network unplugged
33.844
And
I enable persistence
11.239
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
7.117
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.030
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.758
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
12.891
And
I start Tails from USB drive "__internal" with network unplugged
32.471
And
I enable persistence
11.355
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.860
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.210
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050