And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.513
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.949
And
I accept adding "cowsay" to Additional Software
4.326
And
Additional Software is correctly configured for package "cowsay"
0.548
And
I shutdown Tails and wait for the computer to power off
3.914
And
I start Tails from USB drive "__internal" with network unplugged
34.243
And
I enable persistence
12.299
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
7.196
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.182
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.038
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.701
And
I can open the Additional Software configuration window from the notification
2.438
And
I shutdown Tails and wait for the computer to power off
18.031
And
I start Tails from USB drive "__internal" with network unplugged
35.145
And
I enable persistence
11.861
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.971
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.162
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.043