And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.924
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.587
And
I accept adding "cowsay" to Additional Software
4.972
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
4.021
And
I start Tails from USB drive "__internal" with network unplugged
34.637
And
I enable persistence
12.940
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.157
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.027
And
available upgrades have been checked
0.041
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.377
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
18.090
And
I start Tails from USB drive "__internal" with network unplugged
34.492
And
I enable persistence
12.004
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.387
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.094
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068