And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.994
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.365
And
I accept adding "cowsay" to Additional Software
4.893
And
Additional Software is correctly configured for package "cowsay"
0.458
And
I shutdown Tails and wait for the computer to power off
2.519
And
I start Tails from USB drive "__internal" with network unplugged
32.549
And
I enable persistence
10.200
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
6.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.041
And
available upgrades have been checked
1.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.838
And
I can open the Additional Software configuration window from the notification
2.404
And
I shutdown Tails and wait for the computer to power off
17.511
And
I start Tails from USB drive "__internal" with network unplugged
32.026
And
I enable persistence
10.670
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.028
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.039