And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.217
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.691
And
I accept adding "cowsay" to Additional Software
5.040
And
Additional Software is correctly configured for package "cowsay"
0.506
And
I shutdown Tails and wait for the computer to power off
4.061
And
I start Tails from USB drive "__internal" with network unplugged
35.129
And
I enable persistence
12.903
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.053
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.044
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.850
And
I can open the Additional Software configuration window from the notification
2.512
And
I shutdown Tails and wait for the computer to power off
18.040
And
I start Tails from USB drive "__internal" with network unplugged
34.910
And
I enable persistence
11.781
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.532
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.030
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.039
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085