And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.878
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.090
And
I accept adding "cowsay" to Additional Software
4.961
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
2.710
And
I start Tails from USB drive "__internal" with network unplugged
34.516
And
I enable persistence
12.192
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.007
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.038
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.867
And
I can open the Additional Software configuration window from the notification
2.419
And
I shutdown Tails and wait for the computer to power off
17.923
And
I start Tails from USB drive "__internal" with network unplugged
36.089
And
I enable persistence
11.961
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.141
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.026
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049