And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.769
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.357
And
I accept adding "cowsay" to Additional Software
5.019
And
Additional Software is correctly configured for package "cowsay"
0.628
And
I shutdown Tails and wait for the computer to power off
4.031
And
I start Tails from USB drive "__internal" with network unplugged
34.627
And
I enable persistence
12.364
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
8.030
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.029
And
available upgrades have been checked
0.049
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.329
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
12.827
And
I start Tails from USB drive "__internal" with network unplugged
34.786
And
I enable persistence
11.270
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
8.909
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049