And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.155
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.879
And
I accept adding "cowsay" to Additional Software
2.496
And
Additional Software is correctly configured for package "cowsay"
0.607
And
I shutdown Tails and wait for the computer to power off
3.833
And
I start Tails from USB drive "__internal" with network unplugged
34.249
And
I enable persistence
12.049
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
8.180
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.037
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.281
And
I can open the Additional Software configuration window from the notification
2.375
And
I shutdown Tails and wait for the computer to power off
13.091
And
I start Tails from USB drive "__internal" with network unplugged
34.437
And
I enable persistence
13.970
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.684
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057