And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.683
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.463
And
I accept adding "cowsay" to Additional Software
5.324
And
Additional Software is correctly configured for package "cowsay"
0.689
And
I shutdown Tails and wait for the computer to power off
2.787
And
I start Tails from USB drive "__internal" with network unplugged
33.105
And
I enable persistence
11.851
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.078
And
I log in to a new session
7.427
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.395
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.030
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.410
And
I can open the Additional Software configuration window from the notification
2.519
And
I shutdown Tails and wait for the computer to power off
17.945
And
I start Tails from USB drive "__internal" with network unplugged
32.767
And
I enable persistence
10.702
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.789
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071